sewage treatment dosing device Manufacturer fully automatic integrated dry powder dosing system
The three compartment integrated PAM dosing device is composed of water supply system, dry powder dosing system, dissolution curing system, control system and liquid dosing system.
The three compartment automatic dosing device is an intelligent, fully automatic and continuous flocculant dissolving and dosing device. The concentration of the prepared solution is generally 0.1% - 0.5%.
Working principle
The dosing system is automatically controlled by PLC, and the control box is connected to the liquid level gauge installed on the solution storage tank. Once the liquid level reaches the "low level", the solenoid water inlet valve is triggered to open, and the dry speculation is started at the same time. The size and amount of dry dosage can be accurately set to obtain accurate concentration. Once the "high bit" is reached, the cycle stops.
The whole preparation process of the dosing equipment is controlled by PLC, which can realize the functions of automatic intermittent, continuous operation and stop cross mixing, so as to make the solution blend evenly. When the dry powder level in the hopper reaches the low level, the electric control box can send out audible and visual alarm signals and stop the whole machine.
Application
The fully automatic dosing device is safe, convenient, reliable and widely applicable, especially to the paper industry, industrial wastewater treatment and municipal wastewater treatment plants, water plants and various industries that need to use flocculant solution.
Parameters
| Type | QJY-500 | QJY-1000 | QJY-1500 | QJY-2000 | QJY-3000 |
| production abilityQ(L/h) | 500 | 1000 | 1500 | 2000 | 3000 |
| Size | 900x1500x1650 | 1000 x 1625 x1750 | 1000 x 2440x1800 | 1220 x 2440 x180C | 1220x3200x2000 |
| Powder Dosing PowerNi(KW) | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 |
| blender | Blade diameterG(mm) | 250 | 250 | 250 | 250 | 250 |
| Vertical spindle speed(i/min) | 96 | 96 | 96 | 96 | 96 |
| PowerN2(KW) | 0.55 x 2 | 0.55x2 | 0.55 x 2 | 0.55x2 | 0.55x2 |
| Dosing screw pump | Flow Q2(mV h) | 1 | 1 | 1.5~2.0 | 1.5-2.0 | 3.0~ 5.0 |
| Lifth(m) | 20 | 20 | 20 | 20 | 20 |
| Power N3(KW) | 1.1 | 1.1 | 1.5 | 1.5 | 2.2 |
| Water Inlet Dia(mm) | 20 | 20 | 25 | 25 | 32 |
| Water outlet Dia(mm) | 20 | 20 | 25 | 25 | 32 |
| Installation | B | 900 | 1000 | 1000 | 1220 | 1220 |
| L | 1500 | 1625 | 2440 | 2440 | 3200 |
| H | 1650 | 1750 | 1800 | 1800 | 2000 |
| Hi | 800 | 1050 | 1050 | 1050 | 1350 |
Real picture
Operating Steps
Note: different plc control systems may have some differences in operation. Please follow the manufacturer's instructions. This is mainly for the three tank integrated dosing device.
1. Connect the power supply, pipeline and water source, and do a good job of basic security.
2. Switch the change-over switch of metering pump of dosing pump, inlet solenoid valve, dissolution tank mixer, and connecting valve between raw liquid tank and dissolution tank to the "remote" position. Adjust the stroke speed of the metering pump on site.
3. Move the floating ball of the box up and down one by one by hand to see whether the signal can be sent normally, and then check whether the level alarm in the hopper can work normally.
4. Return to the central control, click to enter the "dosing system" screen, and manually adjust the output frequency of the metering pump.
5. Open the water inlet valve and press the start button of the feeding motor to start feeding. Stop feeding after one minute of operation.
6. Observe the liquid level gauge. When the liquid level gauge reaches the required height for dilution of raw solution, close the inlet solenoid valve and the mixer. Click the icon of the outlet valve of the dissolution tank to open the outlet valve, and click the icon of the metering pump to open the metering pump. Pay attention to the liquid level gauge and flowmeter. When the liquid level is too low, turn off the metering pump in sequence and close the liquid outlet valve.
7. Weigh the polymer in the container and make records.
8. Stop the feeder.
Company Profile
Jiangsu Longdai Environmental Technology Co., Ltd. is an environmental protection equipment manufacturer with 11 years of experience. It has provided a large number of sophisticated environmental protection equipment at home and abroad, established three branches in China, and cooperated with many universities to build Longdai R&D center. There are 4 middle doctors, 10 masters, and 25 senior engineers. Main business: "Petrochemical Wastewater Treatment, Urban and Rural Wastewater Treatment, Waste Gas Collection and Treatment, Industrial Wastewater Treatment, etc."
Main equipment: "Integrated treatment equipment, grille decontamination machine, sand water separator, mud scraper, air flotation device, dosing device, sludge thickener, rotary drum micro filter, conveyor, etc."
The technical team participates in technical exchange meetings every year, exchanges experience with professionals, continuously improves technical competitiveness, and provides customers with the clearest and most practical design solutions.
The processing team controls the manufacturing details of each equipment, and manufactures the most sophisticated and reliable equipment for customers.
The company has passed ISO9001-2008 international standard quality system certification.
We look forward to contacting you, please give us a chance. I hope we can trust each other for mutual benefit and win-win results.
FAQ
Q: How Can I Find The Suitable Model?
A: Please Provide Flow Rate, Solids Content And Sludge Type, or directly contact us by the clicking the “contact” icon. We Can Assist You In Model Selection.
Q: Where Is Your Factory Located?
A: Yixing City, We are in the famous city of environmental protection equipment ,professional for Sludge screw press dewatering Machine ,Which Is Very Close To Shanghai With Only Less Than 3 Hours' Driving. Welcome for your visiting.
Q: Do You Provide OEM Service?
A: Yes. We Can Do The Customized Design According To Your Different Request for sludge Dewatering.
Q: How About The Production Capacity Of Your Company?
A: Our Factory Covers Area Over 15,000m² And Produces Machines 2000 Sets Per Year.
Q: How Could We Trust You And Your Company? Is This Your First Time Transaction?
A: A: Our Company Has More Than 20 Years Professional Experience. We Cooperate Over 800 Customers in China And Overseas. We Export Nearly 60 Countries All Over The World. And We Have More Than 60+Patents, CE,ISO 9001,SGS Certificates.
Q: Do You Offer After-Sales Service?
A: Video Technical Support, Online Support,Spare Parts, Field Maintenance Repair Service
