Automatic Carbon Steel Quartz Sand Filter Activated Carbon Manganese Sand Shallow Sand Multi-Media Filtration
Multi media filter is a process that uses one or several filter media to pass water with high turbidity through granular or non granular materials with a certain thickness under a certain pressure, so as to effectively remove suspended impurities and clarify water. The commonly used filter materials include quartz sand, anthracite, manganese sand, etc., which are mainly used for water treatment and turbidity removal, softening water, pre-treatment of pure water, etc., and the effluent turbidity can reach below 3 degrees.Meaning of filtration: in the process of water treatment, filtration generally refers to the process of intercepting suspended
impurities in water with filter material layers such as quartz sand and anthracite, so as to make water clear. The porous material used for filtration is called filter material, and quartz sand is a common filter material. The filter materials are granular,powdery and fibrous. Common filter materials include quartz sand, anthracite, activated carbon, magnetite, tourmaline, porous
ceramics, plastic balls, etc.
The multi-media filter (filter bed) is a medium filter with more than two media as the filter layer. In the industrial circulating water treatment system, it is used to remove impurities and adsorbed oil in sewage, so that the water quality can meet the requirements of recycling. The function of filtration is mainly to remove suspended or colloidal impurities in water, especially
micro particles and bacteria that cannot be removed by sedimentation technology. BOD5 and COD also have a certain degree of removal effect.
Main Features
1. Porous media filters are widely used in water treatment processes and can be used alone, but most of them are used as prefiltration for advanced water treatment (exchange resin, electrodialysis, reverse osmosis).
2. Multi media filter is a commonly used pretreatment device for deep purification of water quality. Different filter materials can be added according to the process requirements.
3. The multi-media filter can be made of glass fiber reinforced plastics, A3 steel anti-corrosion or rubber lining, all stainless steel. The operation modes are fully automatic and manual. The automatic control is controlled by the automatic controller and pneumatic and hydraulic valves imported from the United States. It is simple to operate and easy to maintain. It is widely used in the pretreatment devices of water treatment processes in all walks of life.
4. The filter material of multi-media filter (including double filter material filter) shall have sufficient chemical stability,and the relative density and particle size of each medium shall be different. The relative density of anthracite used in the double-layer filter material filter composed of anthracite and quartz sand is 1.4-1.6, with particle size of 0.8-1.8mm, and the
relative density of quartz sand is 2.6-2.65, with particle size of 0.5-1.2mm; In addition to the above two filter materials, the three-layer filter can also use heavy ores such as manganese sand and magnetite, with a relative density of 4.7-5.0 and a particle size of 0.5-4mm.
Real picture
Company Profile
Jiangsu Longdai Environmental Technology Co., Ltd. is an environmental protection equipment manufacturer with 11 years of experience. It has provided a large number of sophisticated environmental protection equipment at home and abroad, established three branches in China, and cooperated with many universities to build Longdai R&D center. There are 4 middle doctors, 10 masters, and 25 senior engineers. Main business: "Petrochemical Wastewater Treatment, Urban and Rural Wastewater Treatment, Waste Gas Collection and Treatment, Industrial Wastewater Treatment, etc."
Main equipment: "Integrated treatment equipment, grille decontamination machine, sand water separator, mud scraper, air flotation device, dosing device, sludge thickener, rotary drum micro filter, conveyor, etc."
The technical team participates in technical exchange meetings every year, exchanges experience with professionals, continuously improves technical competitiveness, and provides customers with the clearest and most practical design solutions.
The processing team controls the manufacturing details of each equipment, and manufactures the most sophisticated and reliable equipment for customers.
The company has passed ISO9001-2008 international standard quality system certification.
We look forward to contacting you, please give us a chance. I hope we can trust each other for mutual benefit and win-win results.
FAQ
Q: What certificates do you have? A: CE/ISO/SGS
Q: Do you offer after-sales service?
A: Yes. Engineers available.
Q: How long is your warranty?
A: 2 years after the arrival of the goods. During this period, as long as it is not a man-made damage, we send the damaged parts free of charge.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Q: What about the package of your export product?
A: We use anticorrosion wooden case with foam inside.
Q: What kind of payment do you accept?
A:T/T, L/C, PAYPAL, Cash, D/P, D/A, WESTERN UNIION, MONEYGRAM
